TVS-EC1080 plus

Intel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above

System memory: 32 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 8 GB x4
Total memory slots: 4

512MB DOM

Internal Cache Port

Built-in 256GB (128GB*2) mSATA module for caching

0 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:

1. The standard system is shipped without hard drives.


2. For the hard drive compatibility list, please visit www.qnap.com/compatibility

10 x hot-swappable and lockable tray

2 x 10 Gigabit RJ-45 Ethernet port ( Pre-installed in PCIe slot)
4 x 1 Gigabit RJ-45 Ethernet port (on board)

Note:
1. For the optional network card compatibility list, please visit Compatibility list
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.

Status, LAN, USB, eSATA and 10 GbE

3x USB 3.0 port (1 front, 2 rear)
6x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.

System: Power button and reset button

System warning

Tower

217.5(H) x 327(W) x 321.2(D) mm
8.56(H) x 12.8(W) x 12.65(D) inch

Net weight (NAS only) : 12.52 kg/27.61 lb
Gross weight (with packing and accessories) : 19.75 kg/43.54 lb

Standby: 30.4 dB
In operation: 31.6 dB
(with 10 x 1TB hard drives installed)

Sleep mode: 68W
In Operation: 130W
(with 10 x 1TB hard drives installed)

0-40˚C

5~95% non-condensing, wet bulb: 27˚C.

Input: 100-240V AC, 50/60Hz, Output: 350W

1* PCIe Gen3 x8 ( Pre-installed with QNAP LAN-10G2T-D dual-port 10 Gigabit Network card)

2 x 12 cm smart cooling fan